Friday, July 14, 2017

Chapter 10.1 - Avogadro number and Gram Atomic Mass

In the previous section, we saw that, in any chemical reaction, we must take a specified number of molecules of each reactants. Other wise the reaction will not be completed.

So we have to answer a question:
■ Molecules are very minute particles. How can we count them?
• To answer this question, we will consider the example of coins.
1. Suppose in a bank, it is required to make up an amount of Rs. 100000/- (Rs. One lakh). The amount must consist of only one rupee coins.
2. It will be very difficult and time consuming to count one lakh coins. So an easier method is adopted:
3. Let the mass of one 1 Re coin be 5 grams. Then:
• Mass of two 1 Re coins = Number of coins × mass of one coin = 2 × 5 = 10 grams
• Mass of five 1 Re coins = Number of coins × mass of one coin = 5 × 5 = 25 grams
4. Conversely,
• If a 'group of 1 Re coins' has a total mass of 10 grams, then:
    ♦ the number of coins in that group = Total mass of the group⁄Mass of one coin 
= 10⁄5  = 2 coins        
• If a 'group of 1 Re coins' has a total mass of 280 grams, then:
    ♦ the number of coins in that group = Total mass of the group⁄Mass of one coin 
= 280⁄5  = 56 coins
5. This gives us an easy method to make up 1 lakh rupees:
Step 1: No. of 1 Re coins in 1 lakh = 100000⁄1 = 100000
Step 2: Mass of this much 1 Re coins = Number of coins × mass of one coin 
= 100000 × 5 grams = 500000 grams = 500 kilograms
Step 3: Make a pile of 1 Re coins in such a way that total mass of that pile is 500 kilograms
That pile will be worth 1 lakh
Or make 10 piles each with a total mass of 50 kilograms. The ten piles taken together will be worth 1 lakh

Another example:
Mass of a Rs. 2 coin is 8 grams. Make up an amount of Rs. Two lakhs and Seventy five thousand (Rs. 2,75,000/-)
Step 1: Number of Rs. 2 coins in 2,75,000 = 275000⁄2 = 1,37,500
Step 2: Mass of 137500 coins = Number of coins × mass of one coin 
= 137500 × 8 grams = 1100000 grams = 1100 kilograms
Step 3: Make a pile of Rs. 2 coins in such a way that total mass of that pile is 1100 kilograms
That pile will be worth Rs. Two lakhs and Seventy five thousand
Or make 10 piles each with a total mass of 110 kilograms. The ten piles taken together will be worth Two lakhs and Seventy five

■ So we see that, large numbers can be easily counted by making use of mass. 
[It may be noted that, this method will work only if:
• All the 1 Re coins are of the same mass
• All the Rs.2 coins are of the same mass]
■ Now the next question arises:
How can we find the mass of very minute particles like atoms and molecules?
[To get a rough idea about 'how minute the atoms and molecules are', let us see an example:
• One drop (0.05 ml) of water contain 1.67×1027. 
   ♦ That is., 1670000000000000000000000000 molecules. 
• If this huge number of molecules are to be accommodated in a single drop, they will have to be very very small.
• Now consider atoms. Each water molecule will have three atoms. Two of hydrogen and one of oxygen. 
• So the total number of atoms is three times 1670000000000000000000000000. 
• This much atoms are accommodated in a single drop. So the atoms are still smaller than molecules]

Coming back to our main discussion, we want the mass of atom and molecules. For that, we have to revisit the topic where we derived mass number A. Details here.
■ Let us write the important points that we learned there:
• 1 u = 1.6605×10-27 kg =  1.6605×10-24 grams
• Mass of a proton is 1 u
• Mass of a neutron is 1 u
• Mass of an electron is 0 u
• Mass of an atom 
= Sum of the masses of all protons and neutrons in the nucleus of that atom 
= [(No. of protons × 1 u) + (No. of neutrons × 1 u)] 
= [(No. of protons) + (No. of neutrons)]
So the mass of an atom (when expressed in u) = sum of the number of protons and neutrons in the nucleus
• Consider the words: 'number of protons and neutrons'
• That means we have to count the numbers. So they are counting numbers. Counting numbers are whole numbers. So the mass of any atom will be a whole number. But this is not always the case. Let us see an example:
1. Consider the element neon (20Ne). It has 10 protons and 10 neutrons. So it's mass will be 20 u. 
• But there is an isotope of neon (21Ne). It has 10 protons and 11 neutrons. So it's mass will be 21 u
• There is yet another isotope of neon (22Ne). It has 10 protons and 12 neutrons. So it's mass will be 22 u
2. Thus we have three masses for neon: 20 u, 21 u and 22 u
Which one will we take?
The answer is that, we take the average. The average 'based on abundance'
If we take a sample of neon from nature,
• 90.48% of that sample will be 20Ne  
• 0.27% of that sample will be 21Ne  
• 9.25% of that sample will be 22Ne  
So the average is calculated as:
(20 × 0.9048) + (21 × 0.0027) + (22 × 0.0925) = 20.18 u
• 20.18 is not a whole number. 
• In fact, the atomic mass of most elements are calculated in this way and so it is difficult to obtain whole numbers
For example, 
average atomic mass of nitrogen is 14.0067 
average atomic mass of phosphorus is 15.9994
• The following table shows the results:

Element Average
atomic mass (u)
Hydrogen 1.0079
Helium 4.0026
Carbon 12.0111
Nitrogen 14.0067
Oxygen 15.9994
Phosphorus 30.9738
Chlorine 35.453
3. However, for practical purposes and calculations, most of these values are rounded off to whole numbers. The following table shows the modified values:

Element Average
atomic mass (u)
Atomic mass
considered for
practical purposes (u)
Hydrogen 1.0079 1
Helium 4.0026 4
Carbon 12.0111 12
Nitrogen 14.0067 14
Oxygen 15.9994 16
Phosphorus 30.9738 31
Chlorine 35.453 35.5
• Thus we can easily obtain the mass of one atom of any element

We have already learned the above points in a previous chapter. We can continue our present discussion on 'how to count the number of minute particles' based on the above points.

Gram Atomic Mass and Avogadro Number

■ Consider the element carbon
1. It has an atomic mass 12 u. In '12 u', the unit of mass is 'u'
2.Let us convert this unit to 'grams'
3. We know that 1 u = 1.6605×10-24 grams
So mass of one carbon atom in grams = 12×1.6605×10-24
4. Let us take a sample of some carbon. Let that sample have a total mass of 12 grams.
5. How many carbon atoms will be present in that carbon sample?
Obviously,
• Note that, the '12' in both numerator and denominator cancels each other

■ Consider the element helium
1. It has an atomic mass 4 u. In '4 u', the unit of mass is 'u'
2.Let us convert this unit to 'grams'
3. We know that 1 u = 1.6605×10-24 grams
So mass of one helium atom in grams = 4×1.6605×10-24
4. Let us take a sample of some helium. Let that sample have a total mass of 4 grams.
5. How many helium atoms will be present in that helium sample?
Obviously,
• Note that, the '4' in both numerator and denominator cancels each other

■ Consider the element phosphorus
1. It has an atomic mass 31 u. In '31 u', the unit of mass is 'u'
2.Let us convert this unit to 'grams'
3. We know that 1 u = 1.6605×10-24 grams
So mass of one phosphorus atom in grams = 31×1.6605×10-24
4. Let us take a sample of some phosphorus. Let that sample have a total mass of 31 grams.
5. How many phosphorus atoms will be present in that phosphorus sample?
Obviously,
• Note that, the '31' in both numerator and denominator cancels each other

We saw three examples. In all of them, we got the same number of atoms. But this 'same number of atoms' was due to the 'particular mass' of each element that we took. Let us write more details about this 'particular mass':
1. Take a sample of any element
2. Let the total mass of that sample be 'M grams'
3. In 'M grams', the numeric part is 'M' and units part is 'grams'
4. This numeric part 'M' should be same as the 'atomic mass' of that element
For example, 
'M' should be 16 for oxygen
'M' should be 35.5 for chlorine
'M' should be 4 for helium
5. Then the sample will contain 6.022×1023 number of atoms
This is true for all elements
■ This number '6.022×1023' is called the Avogadro number. It's symbol is NA

• Each element will have a unique value for the 'mass in grams' 
• If we take that much mass of that element, there will be NA number of atoms
• This unique mass is called 'Gram Atomic Mass' (GAM) of that element

The GAM of any element can be written using the following steps
Step 1: Consider a certain mass (in grams) of the element. Let it be 'M grams'
Step 2: 'M grams' have a numeric part 'M' 
Step 3: The numeric part 'M' should be same as the atomic mass of the element
Then 'M grams' is the GAM of that element

Some examples:
1. Find the GAM of nitrogen
Solution:
Step 1: Consider a certain mass (in grams) of nitrogen. Let it be 'M grams'
Step 2: 'M grams' have a numeric part 'M' 
Step 3: The numeric part 'M' should be same as the atomic mass of nitrogen, which is 14
Then '14 grams' is the GAM of nitrogen

2. Find the GAM of oxygen
Solution:
Step 1: Consider a certain mass (in grams) of oxygen. Let it be 'M grams'
Step 2: 'M grams' have a numeric part 'M' 
Step 3: The numeric part 'M' should be same as the atomic mass of oxygen, which is 16
Then '16 grams' is the GAM of oxygen

3. Find the GAM of helium
Solution:
Step 1: Consider a certain mass (in grams) of helium. Let it be 'M grams'
Step 2: 'M grams' have a numeric part 'M' 
Step 3: The numeric part 'M' should be same as the atomic mass of helium, which is 4
Then '4 grams' is the GAM of helium
■ Once we understand the basics, there will be no need to write the steps. Just write the atomic mass (with out 'u') and write 'grams' on the right side.

• So now we know how to write the GAM of any given element. 
• Also we know the speciality of GAM. The speciality is 'same number of atoms'. 
Let us see some examples:
1. GAM of nitrogen = 14 grams
• 14 grams of nitrogen contains 6.022×1023 atoms of nitrogen
    ♦ That is., 14 grams of nitrogen contains NA atoms of nitrogen
2. GAM of hydrogen = 1 grams
• 1 gram of hydrogen contains 6.022×1023 atoms of hydrogen
    ♦ That is., 1 gram of hydrogen contains NA atoms of hydrogen
3. GAM of chlorine = 35.5 grams
• 35.5 grams of chlorine contains 6.022×1023 atoms of chlorine
    ♦ That is., 35.5 grams of chlorine contains NA atoms of chlorine

This GAM gives us an easy method to find the 'total number of atoms in a sample'. We will see it in the next section 

PREVIOUS      CONTENTS       NEXT

                        Copyright©2017 High school Chemistry lessons. blogspot.in - All Rights Reserved

Chapter 10 - Mole Concept

In the previous section, we completed the discussion on Subshell electronic configuration of elements.  In this section we will see the the Mole concept.

First we will do an experiment. We will call it 'Experiment 1'
1. Take a long magnesium ribbon. Clean it well by scraping with a knife
2. Cut the ribbon into small pieces. Length of each piece must be less than 5 mm
3. Take 5 ml of dilute hydrochloric acid in a test tube
4. Put one piece of the ribbon into the acid
• Reaction takes place and hydrogen gas comes out as bubbles.
5. After some time, the formation of bubbles stops 
• This is because, the reaction has come to an end. The magnesium piece is completely used up.
6. But what about the hydrochloric acid?. Is it completely used up?
• We can check this using a blue litmus paper. The blue litmus will turn red. This indicates that, some of the hydrochloric acid still remains.
■ We can conclude that, the reaction came to an end because, the magnesium, which is one of the reactants is completely used up.

Now we will do the same experiment in another manner. We will call it Experiment 2
1. Take just 1 ml of hydrochloric acid in a test tube.
2. Put the pieces of magnesium one by one into the acid
• We can see the bubbles of hydrogen forming
3. But after some time, the reaction stops.
• This time there is some magnesium left.
■ We can conclude that, the reaction came to an end because, the hydrochloric acid, which is one of the reactants is completely used up.

From the two experiments, We can make a conclusion:
■ The reaction will come to an end when any one of the reactants is completely used up
Then a question arises:
■ How much quantities should we take so that both the reactants are completely used up?
• The answer can be found by analysing the reaction between hydrogen and chlorine as an example:
1. The balanced chemical equation of this reaction is:
H2 + Cl2 → 2HCl
2. So, one molecule of hydrogen reacts with one molecule of chlorine to give two molecules of HCl. The symbolic illustration is shown in fig.10.1 below:
Fig.10.1
3. Based on fig.10.1, we can write the following:
• The hydrogen molecule has two atoms
• The chlorine molecule has two atoms
• One atom of hydrogen combines with one atom of chlorine, thus giving the first molecule of HCl
• The other atom of hydrogen combines with the other atom of chlorine, thus giving the second molecule of HCl 
• The number of atoms of each element on both sides of the equation are equal. That is., the equation is balanced

Now consider fig.10.2 below:
Fig.10.2
• This time there are two molecules of hydrogen. So there are 4 atoms of hydrogen. 
• When the reaction takes place, two atoms of hydrogen do not have any chlorine atoms to combine with. 
• So, when the reaction is complete, one molecule of hydrogen will remain as such. That is., hydrogen, which is one of the reactants, is not completely used up.

Let us analyse some more instances like this:
■ Take one molecule of hydrogen and two molecules of chlorine
• In this case, two chlorine atoms do not have any hydrogen atoms to combine with
• So two atoms of chlorine (that is., one molecule of chlorine) will remain. The balanced equation is: H2 + 2Cl2 → 2HCl + Cl2
■ Take two molecules of hydrogen and two molecules of chlorine
• In this case, there are four atoms each for both hydrogen and chlorine. 
So no atoms will remain. That is., all the atoms will be completely used up. The balanced equation is: 2H2 + 2Cl2 → 4HCl
■ Take three molecules of hydrogen and two molecules of chlorine
• In this case, two hydrogen atoms do not have any chlorine atoms to combine with
• So two atoms of hydrogen (that is., one molecule of hydrogen) will remain. The balanced equation is: 3H2 + 2Cl2 → 4HCl + H2
■ Take ten molecules of hydrogen and eight molecules of chlorine
• In this case, four hydrogen atoms do not have any chlorine atoms to combine with
• So four atoms of hydrogen (that is., two molecules of hydrogen) will remain. The balanced equation is: 10H2 + 8Cl2 → 16HCl + 2H2
■ Take twenty molecules of hydrogen and twenty molecules of chlorine
• In this case, there are forty atoms each for both hydrogen and chlorine. 
• So no atoms will remain. That is., all the atoms will be completely used up. The balanced equation is: 20H2 + 20Cl2 → 40HCl

• It is clear that, if we take equal number of molecules of both hydrogen and chlorine, both the reactants will be completely used up. 
■ When the number of molecules of hydrogen and chlorine are equal, we can write this:
Number of hydrogen molecules : Number of chlorine molecules = 1:1
• So, for a complete reaction to take place, the ratio
Number of hydrogen molecules : Number of chlorine molecules
Must be equal to 1:1

But this ratio will not work for all chemical reactions. For example consider the manufacture of ammonia. The balanced chemical equation is:
N2 + 3H2 → 2NH3
From the equation, it is clear that:
• The nitrogen molecule has two atoms
• The three hydrogen molecules together have six atoms
• One atom of nitrogen combines with three atoms of hydrogen, thus giving the first molecule of ammonia
• The other atom of nitrogen combines with the remaining three atoms of hydrogen, thus giving the second molecule of ammonia

• The number of atoms of each element on both sides of the equation are equal. That is., the equation is balanced
• If we take 1 molecule of nitrogen, there must be 3 molecules of hydrogen.
• If we take 2 molecules of nitrogen, there must be 6 molecules of hydrogen.   
• If we take 24 molecules of hydrogen, there must be 8 molecules of nitrogen.
■ So, in this case, for a complete reaction to take place, the ratio
Number of nitrogen molecules : Number of hydrogen molecules
Must be equal to 1:3

For the reaction between hydrogen and oxygen to give water, the balanced chemical equation is:
2H2 + O2 → 2H2O
■ So in this case, for a complete reaction to take place, the ratio
Number of hydrogen molecules : Number of oxygen molecules
Must be equal to 2:1

For the reaction between magnesium and oxygen to give magnesium oxide, the balanced chemical equation is:
2Mg + O2 → 2MgO■ So in this case, for a complete reaction to take place, the ratio
Number of magnesium molecules : Number of oxygen molecules
Must be equal to 2:1

So it is clear that, in any chemical reaction, we must take a specified number of molecules of each reactants. Other wise the reaction will not be completed
Now the next question arises:
• Molecules are very minute particles. How can we count them?
In the next section, we will find the answer this question.

PREVIOUS      CONTENTS       NEXT

                        Copyright©2017 High school Chemistry lessons. blogspot.in - All Rights Reserved

Friday, July 7, 2017

Chapter 9.6 - Properties of d-block and f-block elements

In the previous section, we saw the properties of s-block and p-block elements.  In this section we will see the properties of d-block elements.

Properties of d-block elements 

■ Position: The d-block consists of the groups from 3 to 12 of the periodic table
■ Common names:
The elements of the groups from 3 to 12 are known as transition elements
■ Oxidation state
• Let us find the oxidation state of Fe in FeCl2. 
We have seen the method of calculation here. From the table we have: oxidation state of Cl = -1
Let the oxidation state of Fe be 'x'. Then we get: x + 2 × -1 = 0 ⇒ x -2 = 0 ⇒ x = +2   
So the oxidation state of Fe in FeCl2 is +2
• Let us find the oxidation state of Fe in FeCl3. 
From the table we have: oxidation state of Cl = -1
Let the oxidation state of Fe be 'x'. Then we get: x + 3 × -1 = 0 ⇒ x -3 = 0 ⇒ x = +3   
So the oxidation state of Fe in FeCl3 is +3
• So we see that Fe shows variable oxidation states. Let us analyse and find the reason for this:
1. The S.E.C of  Fe is: 1s22s22p63s23p64s23d6 . 
Fe loses two electrons and becomes Fe2+. The two electrons are lost from the s subshell in the outermost main shell. That is., the 4s subshell. 
So the S.E.C of  Fe2+ is: 1s22s22p63s23p63d6 .
2. The S.E.C of  Fe is: 1s22s22p63s23p64s23d6 . 
Fe loses three electrons and becomes Fe3+. 
First, two electrons are lost from the s subshell in the outermost main shell. That is., the 4s subshell. 
Then one electron is lost from the d subshell in the penultimate main shell. That is., the 3d subshell. 
So the S.E.C of  Fe3+ is: 1s22s22p63s23p63d5.
• When we consider the main shells alone, this phenomenon cannot be explained. 
• But the explanation becomes clear when we consider subshells also:
• The difference in energy between 3d subshell and 4s subshell is very small. So, under suitable conditions, the electron in 3d subshell also take part in chemical reactions. 
• This accounts for the variable oxidation states shown by transition elements  

Another example:
• Let us find the oxidation state of Mn in MnCl2. 
We have seen the method of calculation here. From the table we have: oxidation state of Cl = -1
Let the oxidation state of Mn be 'x'. Then we get: x + 2 × -1 = 0 ⇒ x -2 = 0 ⇒ x = +2   
So the oxidation state of Mn in MnCl2 is +2
• Let us find the oxidation state of Mn in MnO2. 
From the table we have: oxidation state of O = -2
Let the oxidation state of Mn be 'x'. Then we get: x + 2 × -2 = 0 ⇒ x -4 = 0 ⇒ x = +4   
So the oxidation state of Mn in MnO2 is +4
• Let us find the oxidation state of Mn in Mn2O3. 
From the table we have: oxidation state of O = -2
Let the oxidation state of Mn be 'x'. Then we get: 2 × x + 3 × -2 = 0 ⇒ 2x -6 = 0 ⇒ x = +3   
So the oxidation state of Mn in Mn2O3 is +3
• Let us find the oxidation state of Mn in Mn2O7. 
From the table we have: oxidation state of O = -2
Let the oxidation state of Mn be 'x'. Then we get: 2 × x + 7 × -2 = 0 ⇒ 2x -14 = 0 ⇒ x = +7   
So the oxidation state of Mn in Mn2O7 is +7

1. The S.E.C of Mn is: 1s22s22p63s23p64s23d5.
Mn loses two electrons and becomes Mn2+. The two electrons are lost from the s subshell in the outermost main shell. That is., the 4s subshell. 
So the S.E.C of  Mn2+ is: 1s22s22p63s23p63d5 . 
2. The S.E.C of  Mn is: 1s22s22p63s23p64s23d5 . 
Mn loses four electrons and becomes Mn4+. 
First, two electrons are lost from the s subshell in the outermost main shell. That is., the 4s subshell. 
Then two electrons are lost from the d subshell in the penultimate main shell. That is., the 3d subshell. 
So the S.E.C of  Mn4+ is: 1s22s22p63s23p63d3.
3. The S.E.C of  Mn is: 1s22s22p63s23p64s23d6 . 
Mn loses three electrons and becomes Mn3+. 
First, two three electrons are lost from the s subshell in the outermost main shell. That is., the 4s subshell. 
Then one electron is lost from the d subshell in the penultimate main shell. That is., the 3d subshell. 
So the S.E.C of  Mn3+ is: 1s22s22p63s23p63d4.
4. The S.E.C of  Mn is: 1s22s22p63s23p64s23d5 . 
Mn loses seven electrons and becomes Mn7+. 
First, two electrons are lost from the s subshell in the outermost main shell. That is., the 4s subshell. 
Then five electrons are lost from the d subshell in the penultimate main shell. That is., the 3d subshell. 
So the S.E.C of  Mn4+ is: 1s22s22p63s23p6.
• We see that electrons in the d subshell in the penultimate main shell also takes partin the reactions. 
• This is because, the difference in energy level between the following two is very low:
    ♦ s subshell in the outermost main shell
    ♦ d subshell in the penultimate main shell
• So transition elements in general show variable oxidation states
■ Metallic property
The transition elements are metals
■ Coloured compounds
Most of the compounds formed by transition elements are coloured. Some examples are given below:
• Copper sulphate is a compound of copper, which is a transition element. This compound is blue in colour  
• Cobalt nitrate is a compound of cobalt, which is a transition element. This compound is light pink in colour
• Potassium permanganate is a compound of manganese, which is a transition element. This compound is violet in colour    
• Ferrous sulphate is a compound of iron, which is a transition element. This compound is light green in colour  
• Ammonium dichromate is a compound of chromium, which is a transition element. This compound is orange in colour  
• Compounds of transition elements are used to give colour to glass, prepare some dyes etc.,
■ Uses of transition elements
• Copper is used for making electric cables
• Nickel is used for making coins
• Titanium is used aircraft parts

Properties of f-block elements 

■ Position: The f-block elements are those elements which are placed in two rows at the bottom of the periodic table. We have seen the reason for placing them separately in an earlier chapter. Details here.
The elements of the first row are called Lanthanoids and those in the second row are called Actinoids. They belong to the sixth and seventh periods respectively.
■ S.E.C:
• We know that, the last electron of each element in the f-block will be filled in the f subshell. 
Let us examine the S.E.C of two elements:
• First we will consider 58Ce (Cerium). It is a Lanthanoid 
It has the S.E.C: [Xe]4f15d16s2. 
From the S.E.C it is clear that, cerium falls in the 6th period.
The last main shell is 6. But the last electron falls in the f subshell of the main shell 4. That is., 4f    
• Next we will consider 90Th (Thorium). It is an Actinoid 
It has the S.E.C: [Rn]5f36d17s2. 
From the S.E.C it is clear that, thorium falls in the 7th period.
The last main shell is 7. But the last electron falls in the f subshell of the main shell 5. That is., 5f

So we can write:
• f-block elements Lanthanoids belong to the 6th period. Their last electrons are filled in the 4f subshell 
• f-block elements Actinoids belong to the 7th period. Their last electrons are filled in the 5f subshell 

■ Characteristics and uses of f-block elements
• Most of the f-block elements show variable oxidation states like the d-block elements
• Most of the actinoids are radioactive and are artificial elements
• Uranium, thorium, plutonium etc., are used as fuels in nuclear reactors
• Many of them are used as catalysts in the petroleum industry

Now we will see some solved examples

Solved example 9.7
The element X in group 17 has 3 shells. If so,
(i) Write the S.E.C of the element
(ii) Write the period number
(iii)What will be the chemical formula of the compound formed if the element X reacts with element Y of the third period which contains one electron in the p subshell?
Solution:
Part (i):
1. We have two clues:
• The element belongs to group 17
    ♦ From this it is clear that it belongs to the p-block
• It has 3 shells
    ♦ From this it is clear that it belongs to the 3rd period
2. For any element in the p-block, the group number is obtained as follows:
• Number of electrons in the p subshell of the last main shell + 12
3. So we can write: 17 =  Number of electrons in the p subshell of the 3rd main shell + 12
• Thus we get: Number of electrons in the p subshell of the 3rd main shell = 5
4. For any element in the p-block, the last electron is filled in the p subshell of the last main shell
So we can write:
• The last term of the S.E.C is 3p5.
5. If the last term is 3p5, the preceding terms will be:
1s22s22p63s2.
• So the S.E.C is: 1s22s22p63s23p5. 
Part (ii):
The period number is 3
Part (iii):
1. First we will write the S.E.C of element Y
We have two clues:
• The element belongs to the third period
    ♦ From this it is clear that the suffix of the last term of the S.E.C is 3
• It has one electron in the p subshell
    ♦ The p subshell can hold 6 electrons. So, if there is only one electron, it will be the last electron
    ♦ So the last term is 3p1
If the last term is 3p1, the preceding terms will be:
1s22s22p63s2
• So the S.E.C is: 1s22s22p63s23p1. 
2. The last main shell has 3 electrons. So the valency of element Y is 3
From the S.E.C of element X, it's valency is 8 -7 = 1
3. We have seen how to write the chemical formula from valency. Details here.
4. We have to find the element with lower electronegativity between X and Y 
From the S.E.C of Y, the group number of Y is 13
(Number of electrons in the p subshell of the 3rd main shell + 12 = 1 + 12 = 13)
So Y is in the group 13 and period 3. X is in group 17 and same period
Y is on the left of X in the same period
Thus Y is less electronegative than X
So Y is to be written first
5. So the required chemical formula is YX3

Solved example 9.8
The element Cu with atomic number 29 undergoes chemical reaction to form an ion with oxidation state +2
(i) Write down the S.E.C of this ion
(ii) Can Cu show variable valency? Why?
(iii) Write down the chemical formula of one compound formed when Cu reacts with 17Cl. 
Solution:
Part (i):
1. The S.E.C of Cu (copper) is 1s22s22p63s23p64s13d10  OR [Ar]4s13d10.
2. There is only a small energy difference between 4s and 3d subshells. So if conditions are favourable,  electrons in the 3d subshell may also take part in chemical reactions
3. When two electrons are lost to form +2 oxidation state, it is clear that, one electron from the 3d is also lost in addition to the last electon in 4s
4. So the S.E.C of the ion is: 1s22s22p63s23p63d9.
Part (ii)
Cu can show variable valency because, if conditions are favourable,  electrons in the 3d subshell may also take part in chemical reactions  
Part (iii):
1. The S.E.C of Chlorine is: 1s22s22p63s23p5.
It requires 1 more electron to complete octect. So it's valency is 1
2. Cu is ready to give two electrons. One from the 4s subshell and the other from the 3d subshell. So it's valency is 2
3. We have seen how to write the chemical formula from valency. Details here. 
4. Thus the chemical formula of the compound is CuCl2. 
Note that Cu, which has a lower electronegativity is written first.

We have completed our present discussion about Subshell electronic configuration and properties of various blocks. In the next section, we will see Mol concept. 

PREVIOUS      CONTENTS       NEXT

                        Copyright©2017 High school Chemistry lessons. blogspot.in - All Rights Reserved